How to lay laminate flooring

How to lay laminate flooring

Action by action ideas from an pro (Photo: Getty)

Getting ready to lay a new laminate ground can be overwhelming – just after all, it’s a large and very fiddly career.

All the boards will need to suit together correctly, which indicates the process can start to appear like a bit of a jigsaw puzzle in which you never just have to click the pieces into position, but carve some additional to make it great.

For everyone about consider on this Do-it-yourself career, never ever concern, due to the fact we have obtained tips from Christian Roberts, a flooring professional at MyJobQuote, on how to get it just appropriate.

The equipment and materials you’ll will need

  • Tape evaluate – for measuring the installation room and laminate boards
  • Fine-toothed panel noticed – for trimming the architrave
  • Jig noticed – for cutting the boards
  • Floor spacers – for developing space between the boards and the wall
  • Clamps – for closing gaps amongst floorboards
  • Chisel – for clicking the boards into place 
  • Hammer – for clicking the boards into location
  • Straight edge or metal ruler – to ensure the boards are aligned
  • Retractable knife
  • Drill – to drill greater holes in boards (if essential)
  • 32mm flat wood drill little bit – to drill larger sized holes in boards (if required)
  • Plane – to shave the floor of the wooden (if essential)
  • Pencil – for sawing lines
  • Workbench – to lower the boards
  • Mix square – measuring the centre of the boards
  • Mitre box – for guiding a saw
  • Laminate flooring
  • Membrane or underlay – for levelling the floor
  • Panel pins – delivers extra toughness when fastening boards collectively
  • Threshold bar – joins floorboards alongside one another
  • Felt household furniture pads – to protect the ground
  • Seize adhesive – secures boards jointly
  • Flooring trim – can be positioned on the edges of the ground as a finishing contact
  • Pipe surrounds – for concealing pipework underneath the flooring

The prep

Christian suggests you will need to make certain the place you will be operating in is completely empty and, as nicely as eliminating all the primary flooring you’re scheduling to exchange, you need to make certain the area is absolutely clean up.

He provides: ‘You ought to also inspect the area for any protruding nails or uneven surfaces on the floor. These problems will want to be rectified prior to the installation. You must also examine the flooring for any damp areas in advance of laying the new flooring.

‘It’s also critical that you stack the unopened packets of laminate flooring boards in the room the place they will be laid for at least 48 hours to get them acclimatised.’

How to lay the laminate

Just before we get to Christian’s move-by-action guidelines, you should retain in brain that just about every manufacturer of laminate flooring is unique, so make absolutely sure you look at the manufacturer’s instructions very first.

1. After you’ve checked the manufacturer’s guidance, Christian suggests you should begin by arranging the structure of the laminate.

‘You may well lay laminate flooring vertically or horizontally,’ he explains. ‘Lay some of your boards out to see which style you would desire. Be guaranteed to program out the format so that the closing row of boards will be a minimum amount of 60mm large.

‘You could need to adjust the width of your initial row to accommodate this. Generally don’t forget to element in a 12mm enlargement hole at all sides of the room.’

2. If you want to in good shape the boards around a door body, Christian suggests the upcoming stage is eradicating the doorway.

‘Then,’ he provides, ‘get an offcut of the underlay and a floorboard and line it up with the architrave. Use your panel noticed to trim the architrave to that height, so the board can slip snugly beneath the hole.’

3. Christian tells us that most brands will suggest laying down a foam or fibreboard underlay in advance of you install the floorboards.

‘The underlay need to be laid perpendicular to the laminate flooring,’ he points out.

When that is carried out, you ought to then get started laying the flooring to the still left of the wall the place the doorway is located.

‘Begin by laying the first piece of laminate flooring with the tongue edge up versus the wall,’ Christian states. ‘Then pull the board absent slightly, so you can insert spacers among the wall and board.’

4. Upcoming, you should really line the next board up at the close of the initial and push down on it until finally it clicks into location.

‘Make absolutely sure you manage the enlargement hole all the way along the wall with spacers,’ Christian advises.

Repeat this step all the way alongside the wall until eventually no much more full-sized boards will match, creating guaranteed they are all entirely straight.

5. To fill a gap at the end, lay one more board parallel to the boards you’ve now laid.

‘Flip this board above,’ Christian goes on, ‘so it is upside down with the groove edge going through you and so that the other conclude is now touching the wall spacer. Mark out a straight line on the board parallel with the finish of the piece that it is touching.

‘Next, meticulously safe this board to your workbench and make the slice based mostly on your marked line. This minimize board can now be laid in the exact same way as in advance of to fill that hole at the finish.’

6. Hold on to this offcut, due to the fact you may possibly be utilizing it quite soon.

‘If the offcut is at the very least 300mm extensive,’ suggests Christian, ‘use it to start out the upcoming row at that same close exactly where you initially started out laying the initial row. Lay the laminate boards and click them all into put with the row together with it.

‘Always be confident to retain leaving spacers at the wall, and generally make certain that the joint concerning any boards on diverse rows is offset by a least of 300mm.’

7. Now that the second row is in put, you’ll have to fill in the gap involving your very first row and the door.

‘Begin by measuring the distance amongst the outer edge of the architrave on the two sides of the door,’ claims Christian.

‘Next, evaluate the gap among your initial row of boards and the doorway. Mark these measurements on to a new laminate board and then lower it accordingly. Don’t ignore to allow for for a 12mm enlargement gap.

‘Lay this freshly slice board in opposition to the architrave and mark the place on the board you need to minimize in the finishes so that it slots in location. Slice the board at the markings, and then slide the first two rows absent from the doorway so you can set up the suitable doorway pieces.

‘Then, deal with this piece to the initial row by clicking it into spot. After this is accomplished, you can then keep on to lay all of the rows of laminate flooring. Be guaranteed to often leave the spacer gaps at the edges.’

8. When you get to the final row, there is a likelihood you will need to have to lower the boards to make them the ideal dimensions to in shape appropriately.

‘Measure and mark the boards as necessary,’ says Christian, ‘remembering to go away that 12mm hole for growth.

‘Cut the last boards according to these measurements and then lay the very last row.’

Do you have a story to share?

Get in contact by emailing [email protected]

More : How to turn into a lot more self-confident carrying out Do-it-yourself at property

Much more : How to put up Diy floating cabinets

Much more : Do it yourself lady creates soothing spa-like bathroom full of bouquets for just £200